+Production Description

Small Volume CH Type Powder Mixer Powder Blender CH10-CH50

CH type powder mixer is an efficient stirring and mixing equipment, mainly used in the pharmaceutical industry, but also suitable for industries such as food and chemical. It is mainly used for mixing dry or wet powder materials to ensure uniform distribution of materials with different components and improve product quality.

+Working principle

The CH type powder mixer adopts a horizontal U-shaped tank structure, and the materials are fully mixed in the tank through double blade stirring. Its main working principle is as follows:

Feeding:

Dry powder or wet powder materials are put into a U-shaped tank, usually weighed according to the proportion of the formula and added.

Mixing：

After the machine is started, the mixing blade rotates in a fixed direction under the drive of the motor, pushing the material to continuously roll, shear, and diffuse in the tank, so that all components are mixed evenly.

Blade function：

The stirring blade has an S-shaped or Z-shaped structure, and its special angle design allows the material to be flipped in multiple dimensions, avoiding dead corners and ensuring uniform mixing.

Liquidity optimization：

During the mixing process, the material is continuously pushed, flipped, and flows at different levels to improve mixing efficiency.

Uniform mixing：

Over time, the material gradually reaches a state of uniform mixing. The mixing time can be adjusted according to the characteristics of different materials.

Discharge：

After mixing is completed, open the bottom discharge valve or the side flip discharge mechanism, and the material is discharged from the outlet and enters the next process, such as granulation, tablet pressing, etc.

Cleaning and maintenance：

After mixing is completed, the U-shaped tank and stirring blades need to be cleaned to ensure that different batches of materials do not contaminate each other and comply with GMP hygiene standards.

+Characteristics of CH type powder mixer

• U-shaped groove design: Adopting a U-shaped horizontal groove structure, the mixing effect is uniform and not prone to blind spots.

• Paddle mixing: By rotating the mixing blades, the materials are thoroughly mixed, suitable for powders or wet powders with different flowability and viscosity.

• Stainless steel material: Made of high-quality stainless steel, in compliance with GMP standards, corrosion-resistant, and easy to clean.

• Easy to operate: equipped with manual or automatic discharge devices, easy to operate, improving production efficiency.

• Good sealing performance: effectively preventing dust leakage and ensuring a clean production environment.

• Widely applicable: not only for the pharmaceutical industry, but also for powder mixing in industries such as food, chemical, and feed.

+Advantages of CH type mixer:

✅  Suitable for mixing powders and wet powder materials of different viscosities.n of materials.

✅  High mixing uniformity and fast efficiency.

✅  The equipment has good sealing to prevent dust leakage.

✅  Easy to operate, easy to clean, and compliant with pharmaceutical GMP standards.

Choosing the appropriate mixing equipment can not only improve production efficiency, but also ensure the stability of product quality. If you have any questions or needs regarding the CH type powder mixer, please feel free to consult and we will provide you with professional solutions!